Filter
Top Products
ENGLISH
VU
75-ohm300-ohm
VHFUHF
AERIAL
(VHF/UHF)
RF OUT
Connecting the VCR
Basic connections
PREPARATION
1
2
3
1
2
3
75-ohm
coaxial cable
(not supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(not supplied)
To AC outlet
To antenna connector
Antenna cable
(supplied)
TV TV
Antenna splitter (not supplied)
To UHF antenna terminal
To audio
input jacks
Disconnect the antenna cable from your TV and connect it to the AERIAL
connector on this VCR.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the AERIAL
connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor
(not supplied), and connect the adaptor to the AERIAL connector.
Connect the supplied antenna cable to the RF OUT connector on the VCR
and the antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
Connect the AC cord to the AC outlet.
To Connect a TV using the audio and video cables
If your TV has audio/video input jacks, you can connect the VCR and TV using the supplied
audio and video cables.
This connection improves the picture and sound quality.
Video cable (supplied)
Audio cable (supplied)
AC cord
Caution
All connections should be made with both your VCR
and TV unplugged from the Power supply.
To VHF antenna
terminal
4
Red
Yellow
To video
input jack
CONTINUE
White
R AUDIO L
OUT OUT
IN IN
(MONO)
LINE 1
VIDEO