Filter
Top Products
ENGLISH
3
5
6
7
8
AUDIO
OUTPUT
STEREO
LEFT
RIGHT
–
AUDIO
MODE
HI-FI
HI-FI
HI-FI
NORMAL
AUDIO OUT
LEFT
Left
channel
Left
channel
Right
channel
Mono
RIGHT
Right
channel
Left
channel
Right
channel
Mono
RF OUT
Mono
Left
channel
Right
channel
Mono
Tips
• If AUDIO OUTPUT is set to STEREO while playing a
prerecorded SAP BILINGUAL audio program, the primary
language LEFT and the secondary language RIGHT will be
heard simultaneously. For SAP BILINGUAL playback, do not
use STEREO setting. Select RIGHT setting.
• If the VCR is connected to the TV through the antenna cable,
the audio portion of a stereo or SAP BILINGUAL prerecorded
tape will be heard in monaural. Set AUDIO OUTPUT to
select the desired portion when playing back a SAP
BILINGUAL tape. For stereo or SAP BILINGUAL playback,
use the connections given on stereo playback.
Notes
• When you play a tape recorded in mono, the sound is always
played back in mono regardless of the AUDIO MODE
setting.
• The AUDIO MODE setting automatically returns to HI-FI
when a cassette is ejected.
9
Recorded and output signals of the MTS
broadcast
2
1
Playing back a MTS-program
recorded tape
Before starting
Set the VCR/CATV/DBS/TV selector to VCR.
Press MENU.
Press i or k to select SETUP, then press
ENTER/DISPLAY.
Press i or k to select AUDIO OUTPUT.
Note
You can also use the display window to check the broadcast
type.
When the VCR receives the stereo broadcast, ST appears.
When the VCR receives the SAP broadcast, SAP appears.
When the VCR receives the Bilingual broadcast, BIL appears.
CLOCK
PROGRAM
TUNING
SETUP
SELECT ENTER
TO EXIT PRESS
ENTER
MENU
FUNCTION OSD : ON
HI-FI
STEREO
STEREO
STEREO
LANGUAGE SELECT : ENGLISH
AUDIO MODE :
BROADCAST TYPE :
AUDIO OUTPUT :
AUDIO OUTPUT :
CHANNEL MAPPING
SELECT ADJUST
TO EXIT PRESS
MENU
FUNCTION OSD : ON
HI-FI
HI-FI
STEREO
STEREO
LANGUAGE SELECT : ENGLISH
AUDIO MODE :
AUDIO MODE :
BROADCAST TYPE :
AUDIO OUTPUT :
CHANNEL MAPPING
SELECT ADJUST
TO EXIT PRESS
MENU
TV
screen
MONO
STEREO
SAP
STEREO/
SAP
Recorded signal
Broadcast
Mono
Stereo
Mono+SAP
Stereo+SAP
Signal output
from AUDIO
OUT
BROADCAST
Hi-Fi Normal
TYPE
track track LEFT RIGHT
STEREO Mono Mono Mono Mono
SAP Mono Mono Mono Mono
MONO Mono Mono Mono Mono
Left/
Left Right
STEREO Right Mono
channel channel
channel
Left/
Left Right
SAP Right Mono
channel channel
channel
MONO Mono Mono Mono Mono
STEREO Mono Mono Mono Mono
SAP SAP SAP SAP SAP
MONO Mono Mono Mono Mono
Left/
Left Right
STEREO Right Mono
channel channel
channel
SAP SAP SAP SAP SAP
MONO Mono Mono Mono Mono
4
26
Press j or l to select the audio output mode.
STEREO: The stereo sound is heard.
LEFT: The left channel sound is heard from both
channels.
RIGHT: The right channel sound is heard from both
channels.
Press i or k to select AUDIO MODE.
Press j or l to select HI-FI.
HI-FI: The sound on the Hi-Fi audio track is played
back.
NORMAL: The sound on the normal audio track is
played back.
Press MENU to return to the normal screen.
Insert a cassette.
Press C PLAY.
Playback begins.
Output signals
The signals output from the AUDIO OUT jacks and RF OUT
to TV connector on the rear panel are as shown below.