Filter
Top Products
ENGLISH
Adding or erasing VCR channels
manually
If Auto Channel Set does not set the VCR channel, add
them manually for recording TV programs.
You can also erase the unnecessary VCR channels.
Press MENU.
Press i or k to select TUNING, then press
ENTER/DISPLAY.
Press i or k to select TUNING BAND, then
press j or l to display TV or CATV.
Press i or k to select CH. ADD/DEL.
Press j or l to select the channel to be
erased or added.
When the selected channel has already been set, ADD
appears. When it has not been set, DEL appears.
4
Press i or k to select AUTO CHANNEL SET,
then press j or l.
All available channels in your area are scanned and
stored in the memory of the VCR.
After scanning, the TV screen in step 3 appears.
Press MENU to return to the normal screen.
If “C” flashes in the display window after
Auto Channel Set
Check the antenna connections and repeat the above
procedure from step 1.
If you still cannot receive the channels, set the VCR
channels manually. See “Adding or erasing VCR channels
manually”.
(Presetting the VCR channels is necessary for recording TV
programs.)
CATV channels
CATV systems use letters and numerals to designate
channels. The table below shows the channel numbers of
the CATV system and the corresponding channel number
displayed on this VCR. For more information on available
channels in your area, consult your local CATV company.
Channels displayed on this VCR CATV channels
01 5A
02 to 13 2 to 13
14 to 36 A to W
37 to 94 W+1 to W+58
95 to 99 A-5 to A-1
100 to 124 W+59 to W+83
125 W+84
5
AUTO CHANNEL SET
PROCEEDING
CHANNEL 11
TO EXIT PRESS
MENU
1
2
3
4
5
CLOCK
PROGRAM
TUNING
SETUP
SELECT ENTER
TO EXIT PRESS
ENTER
MENU
AUTO CHANNEL SET
TUNING BAND : CATVTUNING BAND : CATV
CH. ADD / DEL :
SOURCE SELECT :
CH.23 ADD
TUNER
SELECT ADJUST
TO EXIT PRESS
MENU
AUTO CHANNEL SET
TUNING BAND :
CH. ADD / DEL : CH. 23 ADDCH. ADD / DEL : CH. 23 ADD
SOURCE SELECT :
CATV
TUNER
SELECT ADJUST
TO EXIT PRESS
MENU
ENTER ADD / DELETE
AUTO CHANNEL SET
TUNING BAND :
CH. ADD / DEL : CH. 25 DELCH. ADD / DEL : CH. 25 DEL
SOURCE SELECT :
CATV
TUNER
SELECT ADJUST
ENTER ADD / DELETE
TO EXIT PRESS
MENU
13
Setting the VCR channels (continued)
MENU
j/l
i/k
ENTER/
DISPLAY
Tips
• When you perform the Auto Channel Set, the VCR
automatically selects the band (TV or CATV) in which there
are more channels to be preset. To check the band, press k
to select TUNING BAND in the TUNING menu.
• In the display window, “c” is for a CATV channel and “ch” is
for a TV channel.
Note
Once you conduct Auto Channel Set, the previous settings will
be canceled.