Filter
Top Products
34 Installation and Operation Guide
Description of function keys:
IP Address: Enter the 4-byte IP Address in the appropriate blank space (the
value in each box may be anywhere between 0 and 255). Every IP
camera has to own an IP address to be identified on the network.
Netmask: Enter the 4-byte Subnet Mask in the required blank spaces (usually
any numbers between 0 and 255). It is used to identify the subnet
where the IP camera is sited.
Default Gateway: Enter the 4-byte Gateway in the relevant blank spaces (each unit
value must be between 0 and 255).
Primary Nameserver: Enter the 4-byte DNS Server Address in the blank spaces provided
(each value unit must be between 0 and 255). The DNS Server is in
charge of translating the Domain Name into the IP Address.
HTTP Port: Indicates the specific HTTP Port Number. The default is 80.
Submit: Click to submit the new network setting to the IP camera.