Filter
Top Products
80 Installation and Operation Guide
ARP and ping from UNIX or GNU/Linux:
1. Start a shell
2. Type the following as superuser (root):
arp -s <IP address> <Ethernet address>
[or arp -s <IP address> < MAC address>]
ping <IP address>
Example:
arp -s 192.168.1.100 00-0C-0C-00-00-01
ping 192.168.1.100
The device responds to the ping in the examples above if the new address was configured. Note,
this method will set the IP address permanently.
NOTE: The default account and password after the reset are admin and 9999.