American Dynamics 8200-2646-02 B0 Security Camera User Manual


 
Installation and Operation Guide
67
7. SPECIFICATIONS
ADCIPE3312ICN VideoEdge IP Indoor Mini-dome, 3.3-12mm, clear, NTSC, w/PS
ADCIPE3312ICPE VideoEdge IP Indoor Mini-dome, 3.3-12mm, clear, PAL, EU Plug, w/PS
ADCIPE3312ICPU VideoEdge IP Indoor Mini-dome, 3.3-12mm, clear, PAL, UK Plug, w/PS
ADCIPE3312ISN VideoEdge IP Indoor Mini-dome, 3.3-12mm, smoke, NTSC, w/PS
ADCIPE3312ISPE VideoEdge IP Indoor Mini-dome, 3.3-12mm, smoke, PAL, EU Plug, w/PS
Model
ADCIPE3312ISPU VideoEdge IP Indoor Mini-dome, 3.3-12mm, smoke, PAL, UK Plug, w/PS
System NTSC/ PAL
Video sensor 1/3” Sony Super HAD CCD
Horizontal resolution 520 TV lines
Lens Vari-focal 3.3~12mm
Auto-iris DC drive
Min. illumination IR Off: 0.5 Lux @ F1.2 / IR On: 0 Lux.
Camera adjustment
angle
Pan: 0~360° / Tilt: 0~180°
Day & Night Yes (mechanical IR-cut filter)
Video system
IR distance 20M
Video compression MJPEG or MPEG4 selectable
Resolutions 4CIF / 2CIF / CIF
MJPEG: 30(25) FPS at all resolutions.
Frame rate
MPEG4: 30 (25)/24/15/10/5 FPS at all resolutions.
Image quality 5 levels
Image configurations
Contrast, Brightness, AWB, BLC, Sharpness, Saturation, Mirror,
Private mask (3 areas).
Image
system
Motion Detection Built-in motion detection (96 zones / 5 levels)
Audio One-way audio (audio-in), 8Khz, sample rate.
Interface Ethernet (RJ-45 wired, 10 /100 BaseTX, MDIX supported
Protocols
HTTP, TCP, DHCP, UPnP, ARP, DNS, DynDNS, SNTP, PPPoE, RTP,
RTSP, **SMTP, **FTP.
Security Multiple authorities levels / IP address filtering
Users 8 simultaneous users access
Firmware update upgrade via SD card, HTTP, USB
Network
system
System integration
Software development kit
(HTTP-API / ActiveX control / customized web page tool)
Alarm triggered by built-in motion detection / external alarm input / Network disconnection
Alarm notification by ANNP / e-mail* / SD card / alarm output
Alarm
management
Pre-alarm: 100 pictures
Alarm output 1.0Vp-p, 75ohm, composite, negative, BNC x 1
Ethernet RJ-45 x 1
Push-in jack
(8 pins)
alarm input x 1 / alarm output x 1/ alarm reset x 1 / audio input x 1 /
audio output x1 / RS-485 x2 / GND x 1
SD card slot update / alarm and schedule recording.
USB update / configuration
Connectors
Power jack x 1