Filter
Top Products
17
Setup
Follow the procedures below to connect/set this unit.
Turn off the power of devices to be used before connecting the cables.
K
K
K
K
K
Flow for Connection/Settings
step 1
Mounting the lens (A Pg.18)
Mount the lens.
step 2
Connecting the back panel (A Pg. 20)
Connect the control signal cable, video signal coaxial cable
and the like.
step 3
Mounting the camera (A Pg. 23)
Mount the camera to the mounting location.
step 4
Adjusting the back focus (A Pg. 26)
Adjust the back focus.
step 5
Adjusting the lens (A Pg.28)
Adjust the lens.
step 6
Adjusting the auto white balance (A Pg. 30)
ADCTDN2412N_P_EN.book Page 17 Friday, September 28, 2007 12:49 PM