Filter
Top Products
44
Setting
TITLE/VIDEO screen (continued)
Item Functions and settings
B&W/COLOR (continued)
AUTO
LEVEL
When the MODE item is set to AAUTOB, this function sets
the signal level of the object where the camera will switch
to B&W mode.
LOW : Switches to B&W mode when the signal level
of the object indicates low illumination.
NORMAL: Switches to B&W mode when the signal level
of the object indicates normal illumination.
HIGH : Switches to B&W mode when the signal level
of the object indicates high illumination.
[Default setting: LOW]
ZDisplay for ADCTDN2412N. For ADCTDN2412P/
ADCTDN0230P, COLOUR is displayed.
Memo:
● When MODE item of B&W/COLOR is set to AAUTOB,
A- - -B will be displayed and settings is disabled.
AUTO
TIME
When the MODE item is set to AAUTOB, this function sets
the time required to switch to the B&W/Color mode.
Example: When set to 30s, the camera will switch to
B&W mode 30 seconds after it has become
dark.
[Setting: 5s,10s,20s,30s]
[Default setting: 5s]
Memo:
● When MODE item of B&W/COLOR is set to AAUTOB,
A- - -B will be displayed and settings is disabled.
ADCTDN2412N_P_EN.book Page 44 Friday, September 28, 2007 12:49 PM