DJB; Reviewed:
PV 4/13/06
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
6 of 18
3448PAppNotes.doc
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts
and changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name: admin
Please enter the user password: *****
Please reenter the user password: *****
7. Configure the IP Address and Subnet Mask of the Dell PowerConnect™ 3448P.
Next, an IP Address is setup. This IP Address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP Address that you use to access the CLI, Web interface or
SNMP interface for the switch.
To setup an IP address:
Please enter the IP address of the device (A.B.C.D): 172.16.254.99
Please enter the IP subnet mask (A.B.C.D or /nn): 255.255.255.0
8. Configure the Gateway.
Finally, setup the default gateway. Please enter the IP address
of the gateway from which the network is reachable
(e.g. 192.168.1.1): 172.16.254.4
This is the configuration information that has been collected:
SNMP Interface=”Dell Network Manager”@192.168.1.10
User Account setup = admin
Password = *****
Management IP Address = 172.16.254.99 255.255.255.0
Default Gateway = 172.16.254.4
If the information is correct, please select [Y] to save the
configuration, and copy to the start-up configuration file.
If the information is incorrect, select [N] to discard
configuration and restart the wizard: [Y/N]: Y