Filter
Top Products
Issue 8 February 2007 15
Chapter 4: Install Octaplane Stacking Module
Note:
Note: Complete these steps only if you are connecting more than one G700 Media
Gateway in a stack configuration.
1. Remove the blank faceplate from
the Octaplane slot on the back of
the media gateway.
2. Align the X330STK Octaplane
Stacking Module with the interior
guides and insert until firmly
seated
!
WARNING:
WARNING: To prevent damage to
equipment, handle the
module by the
faceplate or edge.
3. Tighten the captive screws.