Filter
Top Products
Issue 8 February 2007 23
Chapter 8: Install USB Modem and CD-ROM Drive
USB Modem
1. Connect the USB cable to one of the
USB ports on the faceplate of the S8300.
2. Following the instructions packaged with
the modem, connect the other end of the
USB cable to the modem.
3. Connect the analog telephone line to the
RJ-11 jack on the modem.
USB CD-ROM/DVD Drive
The USB CD-ROM or DVD/CD-RW drive is
used primarily as a software source location
when remastering an S8300 hard drive.
1. Connect the USB cable into one of the
USB ports on the faceplate of the S8300.
2. Connect the other end of the USB cable
to the CD-ROM or DVD/CD-RW drive.
3. If you are using an Addonics DVD/
CD-RW drive, connect the power cord to
the drive and an electrical outlet.
Note:
Note: The TEAC drive and S8300/
S8400 drive get their power
from the server over the USB
connection.
4. If you are using an Addonics DVD drive,
set the power source switch on the side
to EXT, not USB. See item 1 in the figure
to the left.
5. If you are using an S8300/S8400 DVD/
CD-RW drive, set the on/off switch to
On.
Be sure to set the S8300/S8400 drive to
Off when not in use.
h1dcadvd LAO 103006
A
ddonics
EXT
1