Filter
Top Products
Issue 8 February 2007 17
Chapter 5: Connect Media Gateways
Note:
Note: Complete these steps only if you are connecting more than one G700 Media
Gateway in a stack configuration.
1. Using the gray X330SC short cables,
connect the media gateways from the
bottom up:
● Connect the light gray connector to the
port labeled “Cable to upper unit.”
● Connect the dark gray connector to the
port labeled “Cable to lower unit.”
● Repeat both steps until all units in the
stack are connected (maximum of 10
units).
2. For single-stack redundancy, connect the
bottom unit and the top unit using the
black X330RC redundancy cable:
● Connect the light gray connector to the
port labeled “Cable to upper unit: on
the top unit of the stack.
● Connect the dark gray connector to the
port labeled “Cable to lower unit” on
the bottom unit of the stack.
Single-stack redundancy