Filter
Top Products
Issue 8 February 2007 27
Chapter 10: Connect the Laptop — G700 without an
S8300
This section assumes the G700 does not contain an S8300 Media Server. Use the Gateway
Installation Wizard from the laptop to enter the initial gateway configuration parameters.
1. Connect the RJ45 end of a serial
cable to the Console port on the
lower right of the front of the
G700.
2. Connect the other end of the
cable to the Serial port on the
laptop.
3. Power on the laptop.
4. Start a Hyperterm (or similar
application) session.
5. Start the Gateway Installation
Wizard (GIW).