Filter
Top Products
Issue 8 February 2007 5
Chapter 1: Before You Go to the Installation Site
The following activities must be completed before going to an installation site.
Other documents
Obtain access to the following documentation:
● The G700/S8300 Installation guide: Installation and Upgrades for Avaya G700 Media
Gateway and Avaya S8300 Media Server, 555-234-100.
● The documentation library on CD, installed on your laptop, or accessible from the Avaya
Support web site: Documentation for Avaya Communication Manager, Media Gateways
and Servers, 03-300151.
License file, software, and firmware
The following tasks must be completed before you can install an Avaya S8300 Media Server
and Avaya G700 Media Gateway.
To do before you install the S8300 and G700
1. Meet with the customer to complete the Electronic Preinstallation Worksheet. The
Electronic Preinstallation Worksheet contains specific information about the customer’s
network configuration and telephony requirements. This information is required to use the
Avaya Installation Wizard to configure the Avaya IP solution.
Note:
Note: To use the Avaya Installation Wizard, Release 2.0 or later of Communication
Manager must be installed on the media server. If a pre-2.0 release of the
Communication Manager is installed on the media server, the software must be
upgraded before the Avaya Installation Wizard can be used.
Note:
Note: The current release of the Avaya Installation Wizard supports only an
English-language operating system.
2. If you are using the Avaya Installation Wizard to generate basic translations on an S8300
primary controller in a G700, get the customer’s Name and Number list file and the Custom
Templates. Copy these files to your laptop. The Electronic Preinstallation Worksheet
contains instructions for the Name/Number and Custom Templates files.