Filter
Top Products
11
AXIS 210/211 - Accessing the Camera
Focusing
To focus the AXIS 210, unscrew the
focus puller on the lens. Adjust the focus
as required. Re-tighten the focus puller.
To focus the AXIS 211, follow the instructions below.
1. From the Basic Configurati
on page
in the setup tools, open the Focus
adjustment page.
2. Set the DC-Iris to Disabled and click
Save.
3. Unscrew the zoom puller on the lens
by turning it anti-clockwise. Adjust
the zoom setting as required.
Re-tighten the zoom puller.
4. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus
puller.
5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.
Note:
The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which
gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set
with this method it will then be maintained in any light conditions.
AXIS 210
Focus puller
AXIS 211
Focus puller
Zoom puller
(Tele/wide)