5
AXIS 210/211 - Introduction
Introduction
This manual covers the following Axis Network Camera models:
• AXIS 210
•
AXIS 211
All instructions and information in this manual are valid for both
models unless otherwise
stated.
Product features
The AXIS 210/211 cameras are part of the latest generation of fully featured Axis Network
Cameras, and are all based on the AXIS ARTPEC-2 compression chip.
The most basic model is the AXIS 210. The AXIS 211
supports further features listed in the
overview below. Both models support the following features:
• Video streams from the camera available
on the network as real-time, full frame
rate Motion JPEG and/or MPEG-4 video streams.
• Video Motion Detection - this can be
used to trigger e.g. image uploads when
there is activity in the video image.
• Scheduled image uploads.
• IP address filtering and multilevel password protection.
• Alarm input and output, which can be connected
to various external devices, e.g.
door sensors and alarm bells.
• Multiple video resolutions.
• Simultaneous access by up to 20 viewers when
using Motion JPEG. If MPEG-4
multicast is used, the number of viewers is unlimited, but each viewer still needs a
separate MPEG-4 license. One license is included in the product, additional
licenses can be purchased separately.
• Privacy masking allows the concealment of parts of the image that should not
be
viewable. Up to 3 areas can be configured as masked areas.
• Built-in web server that provides full access
to all features via a standard web
browser.