Filter
Top Products
59
AXIS 243SA - System options
Resetting to the factory default settings
To reset the AXIS 243SA to the original default settings, go to the System Options >
Maintenance web page (described in Maintenance,
on page 56) or use the control button
on the Axis video server, as described below:
Using the Control Button
Follow the instructions below to reset
the AXIS 243SA to the factory default settings using
the Control Button.
1. Switch off the Axis video
server by disconnecting
power.
2. Press and hold the Control
Button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control Button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the Axis video server has been reset.
6. Re-install the Axis video server, as described in the Installation Guide.
Control button
Status indicator