Filter
Top Products
Configuration AXIS 2130/2130R User’s Manual
20
Reinstating the Factory Default Settings
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 2130/2130R. This is performed by clicking the appropriate button within the
Administration Tools, or by using the Reset Button.
Follow the instructions below to reinstate the product factory default settings using the
Reset Button on the underside of the unit:
1. Using a pointed object (e.g. a paper clip) press the Reset Button and keep it pressed
while you disconnect and reconnect the power.
2. Keep the button pressed for at least five seconds
and then release it.
Note: Reinstating the factory default settings with the aid of the Reset Button will cause all param-
eters (including the IP address) to be reset. Refer to Installation, on page 9, or Other IP Setup
Methods, on page 23, for information on how to set the IP address. To reset to the factory
default settings, but with certain parameters saved, reset instead with the help of the button
provided in the General Settings.