Filter
Top Products
AXIS 2130/2130R User’s Manual Updating the Firmware
29
Appendix C - Updating the Firmware
The AXIS 2130/2130R firmware is stored in Flash memory. This memory is provided by a
silicon chip that, just like any other ROM device, retains data content even after power is
removed. Flash memory is unique because it allows its data to be erased and re-written.
This means you can install firmware updates for your AXIS 2130/2130R as they become
available - without having to replace any parts. New firmware can be simply loaded into
the AXIS 2130/2130R over the network.
Obtaining Updated firmware
The latest version of the AXIS 2130/2130R firmware is available free of charge from the
Axis website at www.axis.com or from your local distributor.
Updating the firmware
The AXIS 2130/2130R Flash memory is updated over the network using FTP.
See the detailed instructions supplied with each new firmware release.
Important!
• Always read the upgrade instructions available with each new release, before updating the firmware.
• Upgrading normally takes between 30 seconds and 10 minutes, although it can take longer. After
starting the process, you should always
wait at least 20 minutes before power-cycling the AXIS
2130/2130R - even if you suspect the procedure has failed.
• In controlled environments, flash memory updates provide a very safe way of updating the firmware.
However, flash products can become damaged if the update is not performed correctly. Your dealer
reserves the right to charge for any repair attributable to faulty updating by the user.