Filter
Top Products
Product Description AXIS 2130/2130R User’s Manual
8
Tripod Mounting
The AXIS 2130 is supplied with a screw hole for tripod mounting. The screw hole is located
on the base of the unit, as shown below. The base plate of the AXIS 2130R is similar, but is
supplied with a ceiling mounting plate instead of the tripod screw hole.
Ceiling Mounting the AXIS 2130R
The AXIS 2130R is designed exclusively for ceiling mounting and a special mounting plate
is supplied for the purpose. Screw the plate (screws not supplied) to the ceiling at the point
of installation.
Serial Number
The serial number is used for setting
the product’s IP address.
Tripod Screw Hole
The serial number is used for setting
the product’s IP address.
Reset Button
Press to restore the factory default
settings.
Screw holes for ceiling
mounting
WARNING!
When installing the AXIS 2130R on the
ceiling, check that the ceiling is strong
enough to bear the weight of the cam-
era plus the mounting plate. A weak
fitting could result in the camera fall-
ing and causing serious injury.
Check for looseness in the camera
installation mount at least once a year.
Mounting Plate Information
Distance between screw holes - 120mm (4
18/25
in.)
Screw hole diameter: 6mm (1/4 in.)
Plate thickness: 1.6 mm (1/16 in.)