Filter
Top Products
Using the AXIS 2130 PTZ Network Camera AXIS 2130/2130R User’s Manual
22
Positional Control of the Camera
The camera’s Pan/Tilt/Zoom (PTZ) device is controlled directly from the unit’s web
interface, as shown in the illustration below:
Notes: •Clicking anywhere on the toolbar’s gradient allows for a “smooth” PTZ adjustment; whereas
clicking on the left or right arrows causes a stepped incremental change.
•Pan/Tilt/Zoom control can be disabled by the Administrator and may be unavailable in the user
interface.
Iris
Controls the amount of light that
enters the camera through the lens.
Set to Auto for optimum performance.
Focus
Allows smooth or stepped
camera focus between near
and far focus.
Home (H)
Returns the camera
to the ‘Home’ position.
Pan
Allows smooth or stepped horizontal
panning of the camera.
Click-in-image
For direct control of the
Pan/Tilt/Zoom device.
Tilt
Allows smooth or
stepped vertical pan-
ning of the camera.
Select Preset Position
To enable quick and
accurate camera posi-
tioning, up to 40 specific
positions can be saved
as presets, which are
created by the Adminis-
trator. Selecting a preset
position from the
drop-down dialog
immediately causes the
selected camera to
assume the predefined
position.
Zoom
Allows smooth or stepped camera
zoom between telescopic and
wide viewing.