Filter
Top Products
AXIS 2130/2130R User’s Manual Other IP Setup Methods
23
Appendix A - Other IP Setup Methods
As an alternative to the ARP command (described earlier in the Installation section of this
manual), you can set the IP address for your AXIS 2130/2130R using any of the following
methods - as appropriate for your operating system:
Notes: •Make sure the AXIS 2130/2130R is powered up and connected to the network.
•IP Address: Acquire an unused IP address from your Network Administrator, and do NOT use the
default IP address featured in the following examples when installing your AXIS 2130/2130R.
•Server Privileges: Although no special privileges are required for Windows 95/98/ME or XP
(Home), you will need Administrator privileges for Windows NT/2000 and XP (Professional).
UNIX systems require Root privileges.
Ethernet/Mac Address: The AXIS 2130/2130R is pre-configured with a unique Ethernet/Mac Address based
upon the serial number printed on the underside label of the unit; where the serial number typically follows
the format 00-40-8c-xx-yy-zz. You need this address to complete the installation.
Method Operating Systems Refer to...
AXIS IP Installer Windows The AXIS IP Installer, on page 24.
BOOTP
Requiring a BOOTP daemon on your system, this
method operates over the entire network. A
request to an active daemon initiates a search of
the boot table to find an entry matching the unit’s
Ethernet address. The daemon downloads the IP
address to the device if a match is found.
UNIX