Filter
Top Products
38 en | Camera set-up Dinion2X IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
6 Camera set-up
The camera normally provides an optimal picture without the
need for further adjustments. Configuration of the camera is
carried out remotely via the network using a web browser.
However, the camera also has a set-up menu in which basic
installation settings (lens wizard, IP address) can be accessed.
To view this menu, connect a monitor to the composite video
output of the camera.
6.1 Camera menu navigation
Five keys are used for navigating through menu system.
– To open the install menu and enable the analog video
output, press and hold the center key for approximately
two seconds. This turns off the IP video stream.
– Use the up or down keys to scroll through a menu.
– Use the left or right keys to move through options or to set
parameters.
– When in a menu, quickly double-press the menu/select key
to restore the selected item to its factory default.
– To close all menus at once hold down the menu/select key
until the menu display disappears or continually select the
Exit item. (This turns the IP video stream back on.)
Some menus automatically close after about two minutes; other
menus have to be closed manually.
Figure 6.1 Navigation
Up key
Menu/Select key (center)
Right key
Down key
Left key