Filter
Top Products
High Speed Pan/Tilt System Installing the High Speed Pan/Tilt | en 13
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
8. Fasten the base to the wall or pole mount with the supplied screws and washers (use a
calibrated torque wrench setting of 2.1 Nm).
Fig. 4.3 Wiring the Device
Fig. 4.4 Preparing the Cables for Wiring
9. Cut the cables to approximately 152.4 mm (6 in) (see Figure 4.4). The earth cable must
be longer then the power wires approximately 10 mm or more to prevent the stretch dis-
connecting.
10. Cover the cable with a plastic tube and fix it with the tie thread.
Reference # Description
1Base
2Gasket
3 Screw Ring
4Washer
5Screw
6Bracket
7Support
7
1
2
3
4
5
6
1
2
3
4
5