Filter
Top Products
High Speed Pan/Tilt System Connecting the Washer Pump (optional) | en 17
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
5 Connecting the Washer Pump (optional)
The High Speed Pan/Tilt System may have an optional washer pump. To connect the washer
pump for the HAC-WAS05-20, HAC-WAS05-50, and HAC-WAS30-50, proceed as follows:
1. Attach the mount, (optional wall or pole mount) by positioning the washer pipe support
in the desired position (see Figure 5.1).
Fig. 5.1 Installing the Washer Cables
!
The device must be wired by skilled technical personnel. Never make any
changes or connections that are not described in this handbook. Failure to fol-
low the instructions indicated in this manual may result in system or safety
hazards, thus invalidating the guarantee.
Reference # Description
1Base
2 Cable Glands
3 Washer Pipe Support
4Gasket
5 Screw Seals
6 Bracket or Pole Support
7Washers
8Screws
1
2
6
5
4
3
7
8