Filter
Top Products
54 en | Configuring the System High Speed Pan/Tilt System
F01U.073.990 | Version 1.0 | 2007.07 Instruction Manual Bosch Security Systems
Auto Exposure Parameters Menu
The Auto Exposure Parameters menu is used to control the iris of the UPH-Z Series. In Auto-
matic mode the iris of the camera/lens combination automatically reacts to light level
changes. In Manual mode the user has full control of the iris.
Parameters Mode - Infrared Menu
The Parameters Mode - Infrared Menu controls how the IR-cut filter of the camera/lens com-
bination reacts to light changes.
Dynamic Masking (UPH-Z Series only)
With dynamic masking, it is possible to create up to 24 masks so as to hide specific areas
defined by the user. The masks are defined in the space and take into account the horizontal,
vertical, and depth position of the zoom at the time of the setting.
The UPH automatically holds the position and the size of the masking, according to the area
displayed.
AE PARAMETERS
1 - MODE: AUTOMATIC
Fig. 11.23 AE Parameters Menu
Feature Description Default Options
MODE Type of exposure control AUTOMATIC
PARAMETERS MODE - INFRARED
1 - INFRARED MODE ENABLING NO
2 - AUTOM. INFRARED MODE YES
3 - INFRARED DELAY TIME 025
4 - ICR OFF AE LEVEL 16
Fig. 11.24 Parameters Mode Menu
Feature Description Default Options
INFRARED MODE
ENABLING
Continuous activation of infrared
mode.
NO YES, NO
AUTOM. INFRARED
MODE
Enables the automatic function
with automatic switching to infra-
red mode.
YES YES, NO
INFRARED DELAY TIME Delayed recognition of daylight
(color) mode; the parameter is
shown in seconds.
25 005 - 255
ICR OFF AE LEVEL Changes the point of switching the
IR-cut filter (ICR) between day and
night time. The lower the value,
the earlier the ICR changes (i.e.
more sensitive to low light).
16 1, 10, 16, 18,
20, 22, 24, 26