Filter
Top Products
High Speed Pan/Tilt System Configuring the System | en 41
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
Feature Description Default Options
PAN SPEED 1 Correspondance between joystick
position and UPHspeed. Joystick
positions have been divided into 7
levels for both axis (pan & tilt);
each level corresponds to a
defined speed which can be modi-
fied by the user.
1.0 0.1-100.0
PAN SPEED 2 2.0 0.1-100.0
PAN SPEED 3 5.0 0.1-100.0
PAN SPEED 4 10.0 0.1-100.0
PAN SPEED 5 20.0 0.1-100.0
PAN SPEED 6 30.0 0.1-100.0
PAN SPEED 7 40.0 0.1-100.0
The data is expressed as degrees per second.
Feature Description Default Options
TILT SPEED 1 Correspondance between joystick
position and UPHspeed. Joystick
positions have been divided into 7
levels for both axis (pan & tilt);
each level corresponds to a
defined speed which can be modi-
fied by the user.
1.0 0.1-40.0
TILT SPEED 2 2.0 0.1-40.0
TILT SPEED 3 3.0 0.1-40.0
TILT SPEED 4 5.0 0.1-40.0
TILT SPEED 5 8.0 0.1-40.0
TILT SPEED 6 10.0 0.1-40.0
TILT SPEED 7 20.0 0.1-40.0
The data is expressed as degrees per second.
Zoom dependent speed by default is turned off. When the zoom-dependent function is turned
off, then the pan and tilt speeds of the UPH are unaffected by the zoom measurement of the
camera/lens combination. If the zoom-dependent function is turned on, the zoom measure-
ment of the camera/lens combination affects the pan and tilt speeds. This is useful when the
zoom is in telephoto (i.e. zoomed in); it slows down the pan and tilt speeds so that very fine
adjustments can be made to follow moving subjects.