Filter
Top Products
58 en | Operation VIP XD
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Controlling Connections
You can control the selected connections and the monitor display using the buttons above the
video image in the Monitor area. The buttons have the following functions:
Selecting Decoder for Quad View
When selecting Quad view, you can select the appropriate decoder for the display. This allows
you to freely assign in which quadrant the relevant video image is to be displayed.
1. In the Monitor area, click the button for Quad view.
2. Click the desired quadrant. The selected quadrant is marked by a red frame.
3. Establish the connection and start the display on the monitor (see Section Establishing
the Connection, page 57). The video images are displayed in the selected quadrant.
Multicast scan
You can use the Multicast scan to search for video sources outside the subnet in which the
VIP XD is located. Check the box in the Preview area to activate the Multicast scan.
Switch to the previous connection in the connection history.
Switch to the next connection in the connection history.
Single view display
Quad view
Activate and deactivate auto-connect (see Section Auto-connect, page 36).
Disconnect and end display of video images on the connected monitor.
Update display of video image.
Switch to the start-up connection (first connection after selecting VIP XD).