Filter
Top Products
14
Cover
Contents
Part Names
Print Settings
Printing via USB
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Basic Operations
Printing Images
Select images and specify the number of prints as follows. Here, printing
from an SD memory card is described as an example, but you can print
from other memory cards with the same steps.
1 Turn on SELPHY.
Hold the <q> button until the screen at
left is displayed.
To turn off SELPHY, hold the <q> button
again until the screen changes.
2 Raise the screen (LCD monitor).
Never force the screen up more than 45°,
which may damage the printer or cause
malfunction.
3 Insert the memory card into the
slot.
Insert the memory card facing as shown
until it clicks into place.
To remove the card, push it in until it
clicks, and then slowly release it.
The image display screen used in the
next step is displayed (=
6).
Approx. 45°
Label side
4 Choose an image.
Press the <l><r> buttons to select an
image to print.
To jump forward or back by five images,
hold down the <l><r> buttons.
5 Specify the number of prints.
Press the <u><d> buttons to specify
the number of prints.
To increase or decrease the quantity
by five prints, hold down the <u><d>
buttons.
To print other images at the same time,
repeat steps 4 – 5.
Prints of current image
Total prints