Filter
Top Products
59
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB
Cable
Troubleshooting
Printing via Wi-Fi
Appendix
Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2L and
Charger Adapter CG-CP200 (both sold separately). On a full charge, up to
about 36 sheets* of postcard-size paper can be printed.
* According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1 Remove the battery terminal
cover.
2 Attach the battery pack to the
charger adapter.
Slide the terminal-end in the direction of
the arrow (
) and insert the other end
(
) until it clicks into place.
Charging the Battery Pack
Connect the power cord to the
charger adapter with the battery
pack inserted.
Battery charging begins, and the orange
lamp is lit.
When charging is finished in about four
hours, the green lamp will be lit.
Charging continues if you turn on
SELPHY with the charger adapter
connected but will stop while printing.
Battery-Powered Printing
Connect the charger adapter to
SELPHY.
• For battery precautions, refer to the battery user manual.
• Keep the charger adapter on a desk or other stable surface while it is
connected to SELPHY, and be careful not to unplug the cable by mistake.