Filter
Top Products
Additional Information
110
Disc access failure. Check the disc.
- There was an error when reading the disc or attempting to write onto it.
- This message can appear also if condensation has formed ( 118). Wait until the DVD burner dries
completely before resuming use.
- The disc may not be loaded correctly. Try removing the disc and reinserting it.
Error reading the data
- Error while reading the recordings from the camcorder.
- Check that the USB cable was not accidentally disconnected.
No disc
- Insert a disc into the DVD Burner.
- This message can appear also if condensation has formed ( 118). Wait until the DVD burner dries
completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no movies to add to the disc.
No scenes left to add
- There are no scenes that have not already been added to discs created previously.
No transfer orders
- No photos have been marked with transfer orders ( 87).
Operation canceled
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
Reading the disc
- Reading data from the disc.
Unable to recover data
- Could not recover a corrupted file.
Direct Print Related Messages
Cannot print this photo
- You attempted to print a photo that was recorded with another camcorder, has a different compression, or
was edited on a computer.
Cannot trim this photo
- You attempted to trim a photo that was recorded with another camcorder.
Check print settings
- Current print settings cannot be used for printing with the button.
Data transfer error
- The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the
printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the
button, check the print settings.
- You attempted to print from a memory card that contains a large number of photos. Reduce the number of
photos.