Cannon HG20 Camcorder User Manual


 
Additional Information
116
Check the direction before inserting
the memory card. Forcing a memory
card into the slot if it is not correctly
oriented may damage the memory
card or the camcorder.
Do not attach any labels or stickers
on the memory card.
SD/SDHC memory cards have a
physical switch to prevent writing on
the card so as to avoid the accidental
erasure of the card's content. To
write-protect the memory card set the
switch to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in
rechargeable lithium battery to keep the
date/time and other settings. The built-
in lithium battery is recharged while you
use the camcorder; however, it will
become totally discharged if you do not
use the camcorder for about 3 months.
To recharge the built-in lithium battery:
Connect the compact power adapter to
the camcorder and leave it connected
for 24 hours with the camcorder off.
Lithium Button Battery
Do not pick up the battery using
tweezers or other metal tools, as this
will cause a short circuit.
Wipe the battery with a clean dry
cloth to ensure proper contact.
LOCK switch
WARNING!
The battery used in this device may
present a fire or chemical burn hazard
if mishandled.
Do not disassemble, modify, immerse
in water, heat above 100 °C or
incinerate the battery.
Replace with a CR2025 battery made
by Panasonic, Hitachi Maxell, Sony,
Sanyo, or with Duracell2025. Use of
other batteries may present a risk of
fire or explosion.
Do not insert the battery into the
mouth. If swallowed, seek medical
assistance immediately. The battery
case may break and the battery fluids
may cause internal injuries.
Keep the battery out of the reach of
children.
Do not recharge, short-circuit or insert
the battery in the wrong direction.
The used battery should be returned
to the supplier for safe disposal.