Canon 0140C001 Digital Camera User Manual


 
84
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Open the cover.
Follow step 1 in “Inserting the Battery
Pack and Memory Card” (=
11) to
open the memory card/battery cover, and
then open the coupler cable port cover
as shown.
3 Insert the coupler.
Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Pack and Memory Card” (=
11)).
Terminals
Make sure the coupler cable passes
through the port.
4 Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position (
).
5 Connect the power cord.
Insert the adapter plug into the end of the
coupler cable.
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
Turn the camera on and use it as desired.
When nished, turn the camera off and
unplug the power cord from the outlet.
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
Coupler Cable Port
Downloaded From camera-usermanual.com Canon Manuals