Filter
Top Products
Changing Shooting Functions
136
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p. 27). You can set the retraction time to
[0 sec.].
● Select [Lens Retract], then press the qr
buttons to select [0 sec.].
If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 48).
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
● Select [AF-assist Beam], then press the
qr buttons to select [Off].
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 148 – 151).
Changing Shooting Functions