Canon 100 IS Digital Camera User Manual


 
Changing the Color and Shooting
91
Specify the target color.
Position the center frame so it is filled with
the color you want and press the r button.
The specified color will be recorded.
Specify the range of colors to be
swapped.
Press the op buttons to adjust the range
of colors affected.
Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
Pressing the l button accepts the
setting and restores the shooting screen.
Using the flash may cause unexpected results in this mode.
The recorded color and range of colors will be saved even if you turn off
the power.
Under some conditions, the image may appear coarse.