Canon 100 IS Digital Camera User Manual


 
19
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
Press the ON/OFF button.
The Date/Time screen will appear.
Set the date and time.
Press the qr buttons to select an option.
Press the op buttons to set a value.
Make the setting.
Press the m button.
Once the date and time have been set,
the Date/Time screen will close.
Pressing the ON/OFF button will turn off
the camera.
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
If you select in Step 2 and press the op buttons and select , you will set
the time to daylight savings (1 hour ahead).
Setting the Date and Time
Reappearing Date/Time screen
Daylight saving time settings