Canon 100 IS Digital Camera User Manual


 
66
You can select the settings for various functions to suit your preferences. AE
stands for Auto Exposure.
Set the mode switch to 4 (p. 42).
G will appear.
If G does not appear, press the m button
and select the shooting mode item. Press
the qr buttons to select G and press the
m button.
Adjust the settings according to
your purposes (pp. 6676).
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
Turn on the flash
Select a higher ISO speed (p. 72)
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 3.5 m (12 in. – 11 ft.), and at
maximum telephoto, it is 45 cm – 2.0 m (1.5 – 6.6 ft.).
Select h.
After pressing the r button, press the qr
buttons to select h, then press the m
button.
Once set, h will appear.
G Shooting in Program AE
What if the shutter speed and aperture value are displayed
in red?
h Turning the Flash On