Canon 100 IS Digital Camera User Manual


 
88
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Select .
Set the mode switch to 4, the press the
m button.
Press the op buttons to select G.
Press the qr buttons to select U
(rightmost icon), then press the l
button.
Press the qr buttons to select , then
press the m button.
Select the shutter speed.
Press the o button.
Press the qr buttons, select shutter
speed and press the m button.
Confirm the exposure.
When you press the shutter button
halfway, the exposure for the selected
shutter speed will appear.
Shooting Long Exposures
The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
It is recommended to set the [IS Mode] to [Off] when shooting with a
tripod (p. 138).
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.