Filter
Top Products
8. Stroboscopic Flash
With stroboscopic flash, a rapid series of flashes is fired. It can be used to
record multiple images of a moving subject in a single photograph for later
study.
You can set the firing frequency (the number of flashes per sec. expressed as
Hz) from 1 Hz to 199 Hz. The firing frequency can be set in 1-Hz increments
from 1 Hz to 20 Hz, in 5-Hz increments from 25 Hz to 50 Hz, and in 10-Hz
increments from 60 Hz to 199 Hz.
Up to 100 flashes can be fired
continuously. This maximum varies
depending on the flash output and firing
frequency. See “Maximum Continuous
Flashes” on page 122.
● Setting the Firing Frequency, Flash Count, and
Flash Output
46
Press the < > button and
select .
• Pressing the < > button changes the
flash mode in the following loop:
1
/
04. F073-E (31~) 02.4.1 2:10 PM Page 46