Filter
Top Products
FEB (Flash Exposure Bracketing)
Check that the subject is within the
flash range displayed on the 550EX’s
LCD panel.
Check that the and icons are
displayed in the viewfinder, then take
the picture.
Take the remaining two bracketed
shots. (If necessary, repeat steps 4
to 6.)
89
5
6
7
Correct exposure.
Decreased exposure by 1 stop. Increased exposure by 1 stop.
• The film advances according to the camera’s current film advance mode.
• Before taking the picture, make sure the flash is ready by checking that the 550EX’s
pilot lamp is red or the icon is displayed in the viewfinder. If the flash is not ready,
only normal AE mode pictures can be taken. The (single-frame) film advance
mode is recommended.
• When the flash is ready, you can continue taking the bracketed flash shots.
Custom Function CF-1 can prevent the FEB setting from canceling automatically after the three
bracketed flash shots are taken. See page 113.
Custom Function CF-2 can change the sequence of the bracketed flash shots. See page 113.
CF
CF
07. F073-E (85~) 02.4.1 2:14 PM Page 89