Canon 9123B002 Digital Camera User Manual


 
109
i Selecting the Drive Mode
If <B> or <M> is set, the time lag from when you press the shutter
button completely until the picture is shot will be longer than with normal
single or continuous shooting.
If [z3: AF operation] is set to [AI Servo AF] or [AI Focus AF], <B>
and <M> cannot be selected. If <B> or <M> is set, [z3: AF
operation] will be fixed to [One Shot AF].
With Live View shooting, <B> and <M> cannot be set.
When the battery level is low, the continuous shooting speed may
become slightly slower.
In AI Servo AF operation, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
i: The maximum continuous shooting speed of approx. 4 shots/sec. is
attained under the following conditions*: At 1/500 sec. or faster shutter
speed, and at the maximum aperture (varies depending on the lens). The
continuous shooting speed may decrease due to shutter speed,
aperture, subject conditions, brightness, lens, flash use, etc.
* With the following lenses, 4 shots per second is achieved with One-Shot AF and
the Image Stabilizer turned off: EF300mm f/4L IS USM, EF28-135mm f/3.5-5.6 IS
USM, EF75-300mm f/4-5.6 IS USM, and EF100-400mm f/4.5-5.6L IS USM.
COPY