Filter
Top Products
3 Setting the FlashN
234
Flash mode
When using an external Speedlite, you can select the flash mode to
suit your desired flash shooting.
[E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
[Manual flash] is for advanced users
who want to set the [Flash output]
(1/128 to 1/1 ) themselves.
Regarding other flash modes, refer to
the instruction manual of an external
Speedlite compatible with the
functions.
Shutter synchronization
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the shutter
closes. When this is combined with a slow shutter speed, you can
create a trail of light such as from car headlights at night. With E-TTL
II (autoflash exposure), two flashes will be fired: Once when you
press the shutter button completely, and once immediately before
the exposure ends. Also, with shutter speeds faster than 1/30 sec.,
1st curtain synchronization will automatically take effect.
If an external Speedlite is attached, you can also select [Hi-speed]
(e). For details, refer to the Speedlite’s instruction manual.
Flash exposure compensation
See “Flash Exposure Compensation” on page 124.
COPY