Filter
Top Products
3-8
1
2
3
4
Cover/Table of
Contents
Introduction
Downloading Images
from the Camera
Setting the Cameras
other than the EOS-1D
Series Cameras
Setting the EOS-1D
Series Cameras
Troubleshooting
Index
Remote Shooting
You can set the color matrix. You can also set in the camera up to 2 color matrix ([6CM set1]
and [7CM set2]) that have color space, color saturation and color tone set optionally.
O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II.
O For more information on setting the color matrix on the camera, refer to “Selecting the Color
Matrix” in the camera’s Instruction Manual.
1
Click [Color matrix].
¿ The [Color matrix] window appears.
2
Click the color matrix to be set in the camera.
¿ The settings are applied to the camera,
and the display returns to the shot settings
window.
O For the color space, color saturation and
color tone of [6CM set1] or [7CM set2],
click the [Settings] button and set in the
[Color matrix settings] dialog box that
appears.
The optional settings [Color space], [Saturation] and [Color tone] in the [Color matrix
settings] dialog box can only be set when [6CM set1] or [7CM set2] is selected in the
[Color matrix] list box.
Specifying the Color Matrix
Personal Function Settings
You can set detailed settings for each function and apply them to the camera. You can also
save the specified settings on your computer and load the saved settings.
O These functions are compatible with all EOS-1D series cameras.
1
Click the [ ] button.
¿ The basic settings window appears.
2
Click [Personal functions].
¿ The [Personal functions] dialog box
appears.
3
Select a tab to be set.
¿ The selected window appears.
O In the [Combination] tab sheet, you can check the specified Personal Function
settings and the status of whether or not the settings are applied to the camera. You
can also save and load the Personal Function settings (p.3-14, p.3-15).
Loads the details of the Personal
Functions that have been specified on
the camera.
All data set in each window is cancelled.
Applies the settings to the camera
and closes the dialog box.
Applies the settings
to the camera.
Cancels all the settings and closes the
dialog box.