3-14
1
2
3
4
Cover/Table of
Contents
Introduction
Downloading Images
from the Camera
Setting the Cameras
other than the EOS-1D
Series Cameras
Setting the EOS-1D
Series Cameras
Troubleshooting
Index
Remote Shooting
Enables Quick Control Dial switch to turn on/off Main Dial, too
O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1D
Mark II.
O Setting the Quick Control Dial switch to <OFF> disables the Main and Quick Control Dials.
Enlargement mode
O This function is compatible with the EOS-1Ds only.
O Select which part of an image is enlarged.
O If you take the shot on the camera with this function [ON], you can enlarge an image.
O For more imformation on using this function on the camera, refer to “P.Fn-30 Enlarging the
image” in the EOS-1Ds Instruction Manual.
Add original decision data
O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark
II and EOS-1Ds.
O The data that shows whether or not the image is the original one can be added to the image.
When selecting the display format of Shooting information (INFO), the [ ] icon showing the
captured image with Original image verification data is displayed.
For more details, refer to “Shooting Information Display” in the camera’s Instruction Manual.
O To verify whether the image is the original, you will need the EOS dedicated accessory Data
Verification Kit DVK-E2 (optional).
O If you wish to enlarge an image, set P.Fn-30 to [ON] during shooting and playback.
The image shot on the camera without setting P.Fn-30 to [ON] cannot be enlarged.
O The image shot on any camera other than the EOS-1Ds cannot be enlarged.
The original decision data cannot be added to the JPEG or TIFF image converted from
the RAW image.
P.Fn-30
P.Fn-30
P.Fn-31
You can check the specified Personal Functions and the status of whether or not the settings
are applied to the camera.
1
Specify the Personal Functions (p.3-8 to p.3-14).
2
Select the [Combination] tab.
¿ The [Combination] tab sheet appears.
3
Check the settings.
O You can check the Personal Function
settings and check if these settings are
applied on the camera.
Checking Personal Function Settings
You can save the specified Personal
Function settings (p.3-15).
You can load the Personal
Function settings saved on
your computer (p.3-15).