Filter
Top Products
Video
34
Playing Back the Video
1 Set the camera mode dial to
or .
2 Press .
• Even if the camcorder is off,
pressing will turn on the
camcorder in playback mode.
• The original movies index screen
appears after a few seconds.
3 Move ( , ) the selection
frame to the scene you want to
play back.
Push the joystick ( ) to extend the
selection frame and browse ( )
through whole index pages. Push the
joystick ( ) to return to the index
screen.
4 Press or to begin the
playback.
• Playback will start from the scene
selected and continue until the end
of the last scene recorded.
• Press again to pause the
playback.
• Press to stop the playback
and return to the index screen.
1 Push the joystick ( ) to display
the joystick guide.
2 Push the joystick ( ) to select
the top row.
3Adjust ( ) the volume.
To turn off the volume, keep the
joystick pressed ( ) toward until
the volume bars disappear.
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the operating mode.
• You may not be able to play back with
another device the movies you recorded
on the memory card with this
camcorder. In such case, play back the
Basic Playback
( 21)
ADJUSTING THE VOLUME DURING PLAYBACK
/
/