Filter
Top Products
93
/ READING THE BUILT-IN MEMORY
- Reading data from the built-in memory.
READING THE CARD
- Reading data from the memory card.
SCENE RECORDED USING ANOTHER DEVICE. CANNOT DIVIDE THE SCENE.
- Scenes recorded with another device and then transferred to a memory card connected to a computer cannot
be divided using this camcorder.
SOME PHOTOS COULD NOT BE DELETED
- Protected photos cannot be deleted. Cancel the protection setting before deleting.
SOME SCENES COULD NOT BE ADDED
- Scene could not be added to the playlist. The playlist cannot contain more than 99 scenes. Delete some
scenes from the playlist ( 53).
SOME SCENES COULD NOT BE DELETED
- Movies that were protected/edited with other devices and then transferred to a memory card connected to a
computer cannot be deleted.
TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE
- The camcorder is updating the memory. Do not disconnect the compact power adapter or remove the battery
pack.
THE CAMCORDER IS SET TO MOVIE MODE
- You pressed while the camera mode dial was set to .
THE CAMCORDER IS SET TO PHOTO MODE
- You pressed while the camera mode dial was set to .
THE CARD IS SET FOR ERASURE PREVENTION
- The LOCK switch on the SD or SDHC memory card is set to prevent accidental erasure. Change the position of
the LOCK switch.
THE MEMORY CARD COVER IS OPEN
- After inserting a memory card, close the memory card slot cover ( 27).
THIS PHOTO COULD NOT BE DELETED
- Protected photos cannot be deleted. Cancel the protection setting before deleting.
TOO MANY PHOTOS DISCONNECT USB CABLE
- Disconnect the USB cable and decrease the number of photos on the memory card to fewer than 1,800.
If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the
connection after a short while.
TRANSFER ORDER ERROR
- You attempted to set more than 998 transfer orders. Reduce the number of photos marked with transfer
orders.
UNABLE TO RECOGNIZE THE DATA
- A memory card with data recorded in a different television system (NTSC) was inserted into the camcorder.
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
PHOTO
Start/Stop