Canon MV550i Camcorder User Manual


 
109
E
Using a Memory Card
4. Press the PHOTO button fully down to record the still picture.
F
disappears from the display. The shutter sound sounds and simultaneously
the display appears to close for an instant as if it were a shutter releasing.
The card access indicator flashes and the card access display appears in the
display (See
“The indicators that appear in the LCD display when MIRROR is
turned on” on page 28)
.
Notes:
To use the self-timer ( 72), press the button before step 3, and then press
the PHOTO button fully down.
The wireless controller’s PHOTO button has no half-way setting. Press the
button fully and the camcorder immediately takes the image.
When the POWER switch is set to CAMERA and the TAPE/CARD switch is
moved from TAPE to CARD, the camcorder modifies the image for appropriate
recording onto a memory card.
The indicators that appear in the display when recording to a memory card:
>>>> 50
FINE
Image stabilizer
( 58)
Image quality ( 105)
Backup battery
( 136)
Remaining battery power
( 135)
Number of images that can
still be recorded on the
memory card ( 106)
#5_ MV550i/530i__E(104-131) 1/9/02 14:53 Page 109