Filter
Top Products
114
E
Using a Memory Card
Immediately after you have recorded a still image to a memory card, you can
check the image without switching the operation mode by the POWER switch.
(CARD PHOTO REVIEW)
You can also easily erase unwanted images while viewing still images recorded to
memory card, protect images from accidental erasure, or mark an image for
printing. (File Operation)
• Card Photo Review is set in CARD CAMERA mode and File Operation is set
in CARD PLAY (VCR) mode.
●
Preventing accidental erasure (Protect )
Select important images and protect them from accidental erasure.
• If a memory card is formatted, however, all images, including protected images,
will be permanently erased.
• The pre-recorded sample images provided on the supplied MultiMediaCard are
already protected.
There are 3 ways to protect a still image (including the ways to cancel the setting).
1. + ➡ CARD PHOTO REVIEW menu ( 115)
2. + ➡ File Operation menu ( 116)
3. + ➡ Card Operations submenu ( 117)
●
Marking a still image for printing (Print Mark )
An image on a memory card must be marked before it can be printed. The
camcorder supports the DPOF (Digital Print Order Format) print format.
Images can be automatically printed on a DPOF-supporting Canon Printer. Up to
50 images per memory card can be print marked.
There are 3 ways to mark a still image for printing (including the ways to cancel
the setting).
To mark an image for printing or erase print marks one at a time
1. + ➡ File Operation menu ( 116)
2. + ➡ Card Operations submenu ( 118)
To erase all print marks
3. + ➡ Card Operations submenu ( 119)
SINGLE
PLAY
(VCR)
CARD
INDEX
PLAY
(VCR)
CARD
SINGLE
PLAY
(VCR)
CARD
INDEX
PLAY
(VCR)
CARD
SINGLE
PLAY
(VCR)
CARD
CAMERA
CARD
Settings of the Still Image recorded to a memory card
REC
SEARCH
#5_ MV550i/530i__E(104-131) 1/9/02 14:53 Page 114