Filter
Top Products
104
Changing the Save Method for the Original Image
When you are shooting still images in a My Colors mode, you can specify
whether or not both the altered image and the original image are recorded.
Save Original is Set to [On]
• Only the altered image is shown in the LCD monitor during shooting.
• The image that appears in the LCD monitor immediately after
recording is the altered image (p. 60). If you erase the image at this
point, the original image is erased along with the altered image.
Exercise adequate caution before deleting a file.
• Since two images are recorded with each shot, the number of shots
remaining is approximately half the number displayed when this
function is set to [Off].
1
In the (Rec.) menu, select
[Save
Original]
.
See Selecting Menus and Settings (p. 47).
2
Use the or button to select
[On] or [Off], then press the MENU
button.
• The display will return to the shooting
screen.
• Select [On] to record the original image
too or [Off] to not record it.
• If [On] is selected, the two images will be
numbered consecutively with the altered
image following the original.