Filter
Top Products
101
Using a Memory Card
E
Recording Motion JPEG Movies on a Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the camcorder
or from devices connected via the DV terminal or the AV terminal. The sound of a
movie recorded on a memory card will be monaural.
1. Press the start/stop button to begin recording.
• You can keep recording until "CARD FULL" appears (max. 60
minutes).
• With MultiMediaCards, the recording time is limited to 10 sec.
in 320 × 240 pixels and 30 sec. in 160 × 120 pixels.
2. Press the start/stop button to stop recording.
❍ Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.
❍ When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.
❍ Do not load/unload a cassette during recording.
❍ We recommend using a SD Memory Card right after you have formatted it
with this camcorder. Recording may be interrupted when you use memory
cards with slow writing speed, or when recording and erasing has been
repeatedly performed on a memory card.
❍ To use the self-timer ( 58), press the (self-timer) button before step 2
and press the start/stop button.
❍ You can select the focusing point when recording a movie on the memory
card.
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record appears.
3. Press the start/stop to stop recording.
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAY
CARD CAMERA
PLAY (VCR)CAMERA
(VTR)
P
O
WER
POWER
CAMERA
PLAY
OFF